Hs-360X Beeper And Led Definitions - Omron HS-360X User Manual

HS-360X Beeper and LED Definitions

In addition to beep sequences, the scanner uses a two-color LED to indicate status.
Event
Standard Use
Power up.
Decode a barcode.
Hands-free Mode
(Presentation Mode On).
Handheld Mode
(Presentation Mode Off).
Transmission error.
Conversion or format error.
RS-232 receive error (Parity Error). Low, Low, Low, Extra-Low beeps
A <BEL> character is received
over RS-232.
Parameter Programming
Input error: Incorrect barcode,
programming sequence, or Cancel
scanned.
Number expected. Enter value
using numeric barcodes.
Successful program exit with
change in parameter setting.
Maintenance Indications
Enter Bootloader
Firmware Installation
HS-360X Handheld DPM Scanner User Manual
Beeper Sequence
Low, Medium, High beeps
(as configured)
None
None
4 Low beeps
5 Low beeps
High beep
Low, High beeps
High, Low beeps
High, Low, High, Low beeps
High, High beeps
None
Data Capture
LED Indicator
Green
Green
Green (stays on)
Green (stays off)
Red
Red
Red
None
Red
Green
Green
Red (stays on)
Red Blinking
2-7