Table of Contents
Advertisement
Set Lengths for Code 128
Parameter # L1 = 209, L2 = 210
The length of a code refers to the number of characters (i.e., human readable characters),
including check digit(s) the code contains. Set lengths for Code 128 to any length, one or
two discrete lengths, or lengths within a specific range. The default is 1 to 55.
When setting lengths for different barcode types, enter a leading zero for single digit numbers.
• One Discrete Length - Select this option to decode only Code 128 symbols containing
a selected length. Select the length using the numeric programming symbols in
Appendix H — Numeric
with 14 characters, scan Code 128 - One Discrete Length, then scan 1 followed by 4.
• Two Discrete Lengths - Select this option to decode only Code 128 symbols containing
either of two selected lengths. Select lengths using the numeric programming symbols
Appendix H — Numeric
in
containing either 2 or 14 characters, select Code 128 - Two Discrete Lengths, then
scan 0, 2, 1, and then 4.
• Length Within Range - Select this option to decode a Code 128 symbol with a specific
length range. Select lengths using numeric programming symbols in
Numeric Keyboard.
and 12 characters, first scan Code 128 - Length Within Range. Then scan 0, 4, 1, and
2 (enter a leading zero for single digit numbers).
• Any Length - Select this option to decode Code 128 symbols containing any number of
characters within the scanner's capability.
HS-360X Handheld DPM Scanner User Manual
Keyboard. For example, to decode only Code 128 symbols
Keyboard. For example, to decode only Code 128 symbols
For example, to decode Code 128 symbols containing between 4
Code 128 - One Discrete Length
Code 128 - Two Discrete Lengths
Symbologies
Appendix H —
9-37
Advertisement
Table of Contents
