2D Symbologies
Code 128 Emulation
Parameter # 123
Enable this parameter to transmit data from certain MicroPDF417 symbols as Code 128.
AIM Code ID Character must be enabled for this parameter to work.
Enable Code 128 Emulation to transmit these MicroPDF417 symbols with one of the following
prefixes:
]C1
if the first codeword is 903-905
]C2
if the first codeword is 908 or 909
]C0
if the first codeword is 910 or 911
Disable Code 128 Emulation to transmit these MicroPDF417 symbols with one of the following
prefixes:
]L3
if the first codeword is 903-905
]L4
if the first codeword is 908 or 909
]L5
if the first codeword is 910 or 911
Scan a programming symbol below to enable or disable Code 128 Emulation.
Linked Micro PDF codewords 906, 907, 912, 914, and 915 are not supported. Use GS1
Composites instead.
Enable Code 128 Emulation
9-114
(1)
*
Disable Code 128 Emulation
(0)
HS-360X Handheld DPM Scanner User Manual