Table of Contents
Advertisement
UPC/EAN
UPC/EAN/JAN Supplemental Redundancy
Parameter # 80
If you selected Autodiscriminate UPC/EAN/JAN Supplementals, this option adjusts the
number of times to decode a symbol without supplementals before transmission. The
range is from two to thirty times. Five or above is recommended when decoding a mix of
UPC/EAN/JAN symbols with and without supplementals. The default is 10.
Scan the programming symbol below to set a decode redundancy value. Next, scan two
numeric programming symbols in
zero for single digit numbers.
UPC/EAN/JAN Supplemental
Redundancy
9-20
Appendix H — Numeric
HS-360X Handheld DPM Scanner User Manual
Keyboard. Enter a leading
Advertisement
Table of Contents
