Table of Contents
Advertisement
Page State Timeout
Parameter # 1365
Page timeout is programmable in 1 second increments from 1 to 99 seconds. The default
timeout is 30 seconds.
Page State Timeout only applies to Page State Mode.
To set a page timeout:
1. Scan the Page Timeout programming symbol below.
2. Scan two numeric programming symbols that correspond to the desired timeout
duration. Enter a leading zero for single digit numbers (for example, for a 5 second
page timeout, scan the 0 programming symbol and then the 5 programming symbol).
Page Timeout
HS-360X Handheld DPM Scanner User Manual
Radio Communications
4-53
Advertisement
Table of Contents
