Table of Contents
Advertisement
User Preferences
Default Parameters
The scanner can be reset to two types of defaults: factory defaults or custom defaults.
Scan the appropriate programming symbol below to reset the scanner to its default settings
and/or set the scanner's current settings as the custom default.
Restore Defaults - Resets all default parameters as follows:
• If custom default values were configured (see Write to Custom Defaults), the custom
default values are set for all parameters each time the Restore Defaults programming
symbol below is scanned.
• If no custom default values were configured, the factory default values are set for all
parameters each time the Restore Defaults programming symbol below is scanned.
(For factory default values, see
• Set Factory Defaults - Scan the Set Factory Defaults programming symbol below to
eliminate all custom default values and set the scanner to factory default values (For
factory default values, see
• Write to Custom Defaults - Custom default parameters can be configured to set unique
default values for all parameters. After changing all parameters to the desired default
values, scan the Write to Custom Defaults programming symbol below to configure
custom defaults.
*
Restore Defaults
Write to Custom Defaults
HS-360X Handheld DPM Scanner User Manual
User Preferences and Miscellaneous Options
Appendix A — Standard Default
Appendix A — Standard Default
Parameters.
Parameters.
Set Factory Defaults
5-5
Advertisement
Table of Contents
