Galvo Connections (J201 And J202); Table 2-19: Galvo Connector Pin Assignment (J201 And J202) - Aerotech A3200 Hardware Manual

Nmark CLS Hardware Manual

2.6. Galvo Connections (J201 and J202)

Each Galvo connector (a 25-pin, D-style connector) has 2 analog encoder inputs, 1 position detector input, 5
volt encoder power, 24 volt fan power, and galvo motor connections.
Table 2-19: Galvo Connector Pin Assignment (J201 and J202)
Pin Description
1 Sine 1+
2 Cosine 1+
3 Encoder Ground
4 Sine 2+ / Position Detector A+
5 Cosine 2+ / Position Detector B+
6 Reserved
7 Marker 1+
8 Encoder Power (+5V, 500 mA)
9 Fan Power +
10 Reserved
11 Shield
12 Motor +
13 Motor +
14 Sine 1-
15 Cosine 1-
16 Encoder Ground
17 Sine 2- / Position Detector A-
18 Cosine 2- / Position Detector B-
19 Reserved
20 Marker 1-
21 Encoder Ground
22 Fan Power -
23 Shield
24 Motor -
25 Motor -
Mating Connector
25-Pin D-Connector
Backshell
www.aerotech.com
Installation and Configuration
Aerotech P/N
ECK00101
ECK00656
Chapter 2
In/Out/Bi Pin Location
Input
Input
--
Input
Input
--
13
Input
25
--
--
--
--
Output
Output
Input
Input
--
Input
Input
14
--
1
Input
--
--
--
Output
Output
Third Party P/N
FCI DB25P064TXLF
Amphenol 17E-1726-2
35