Getinfo - Teltonika GH5200 User Manual

Command
bbinfo #
sdformat
Table 5. SMS commands related to Bluetooth
Command
btgetlist #
btscan
btvisible #
btrelease #
btunpair #
Parameter ID consists of 3 or 5 digits. Detailed list of parameters and IDs can be found in
Parameter list.
For example: 'username password setparam 2001:wap' will change configured APN.
As another example: 'username password setparam 2001:wap;2002:user;2003:pass' will
change configured APN name, APN username and APN password. SMS command is limited to
160 characters.

6.1.1 getinfo

Response details
RTC RTC Time
Init Device initialization time
UpTime Total up time (in seconds)
PWR Last restart reason
RST Total restarts count
GPS GPS receiver state. 0 – OFF, 1 – ON without fix, 2 – ON with fix, 3 – In sleep
mode.
SAT Average satellites
TTFF Time To First Fix
TTLF Time To Last Fix
NOGPS How much time no GPS fix (h:min)
SR Number of Sent Records
Description
SMS message
Returns the same information as bbread command but
additionally all events timestamps are written in HEX.
1.# - returns entered number of latest events. When #
is omitted the latest events are packed into a single
SMS message
Formats NAND
Description
Returns requested Bluetooth list
# - 0,1 or 2 (0 – Discovered, 1 – Paired, 2 – Connected)
Starts Bluetooth scan
Sets Bluetooth to visible with TMO
# - visibility TMO (from 1 to 255 seconds).
Disconnects from current device and pauses auto
connect functionality for a TMO duration
# - none or TMO (from 1 to 255 seconds).
Unpairs Bluetooth device
# - all, BT address (all – unpair all devices, BT address –
unpair only specified MAC address)
Description
58
Response
Yes
Yes
Response
Yes
Yes
Yes
Yes
Yes