4.3 Mounting
(1) Mounting the main unit
For mounting method of the main unit, refer to details in Chapter 8.
(2) Mounting a tag plate
① Pull out upward the furnished tag through the tag insert opening illustrated below. (Hooking
by a small flat head screwdriver facilitates the work.)
② Enter the instrument name, etc. on the "tag plate".
③ Put the tag plate in place as illustrated below through the tag plate insert opening provided
on the top of front panel.
4.4 Wiring
(1) Wiring
For wiring method, refer to Chapter 9.
4 - 2
Tag insertion opening
Chameleon key
Fig. 4-2 Inserting an indicating tag
Warning
Task should be performed by
experienced engineer only.
FIC-001
MENU key
Warning
Task should be performed by
experienced engineer only.
INP-TN1PDA3-E