Section 3 Specifications
(2) Functions
1) Status indication LED
Input status indication (red)
Output status indication (red)
PWR (red)
Status
ON (red)
Power is being supplied normally.
OFF
Unit with power supply:
Unit without power supply: The power supply is OFF.
3) I/O terminal block
* The tightening torque: 0.59 to 0.78N·m.
* For the details of the signal assignment and wiring method, see to "3-10 Terminal Arrangement."
* The terminal blocks of expansion units are not detachable.
* The left figure shows the status indication LED
of the expansion unit with 24 points.
The power supply of the main unit is OFF or the expansion cable is disconnected.
3-43