Analog Input/Output Board (Na3Aw03-Mr); Specifications; Names - Fuji Electric MICREX-SX series SPF User Manual

Section 3 Specifications

3-6-5 Analog input/output board (NA3AW03-MR)

(1) Specifications

Item
Type
No. of input channels
Input impedance
Maximum allowable input
Analog input range
Resolution
Overall accuracy
A/D conversion value
Sampling cycle
Moving average
No. of output channels
External load resistance
Analog output range
Resolution
Overall accuracy
Data type of digital output value INT type
Output cycle
External wire connections
Applicable wire size
Status indication
Isolation method
Occupied words
Internal current consumption
*1 The overall accuracy is the specification for when noise described in "Electrical service conditions" is not applied.
If noise is applied, the overall accuracy may exceed the above specification.
*2 Screw tightening torque for mounting the board on a main unit: 0.2 N·m

(2) Names

* For the detailed specifications of and how to use the analog input/output board (Type: NA3AW03-MR), refer to the user's
manual "Analog Unit (FEH527)."
Specification
NA3AW03-MR
2 channels
Voltage input: 100 kW, Current input: 125 W
Voltage: ±15V, Current: 30mA
0 to +10V
0 to 20mA
* Selectable by wiring of the terminal block.
14 bits (Set for each channel by the program loader.)
±1% *1
INT type
Synchronized with the scan of the main unit.
1 to 16 times (Set for individual channels by the program loader.)
1 channel
Voltage output: 2 kW to 1 MW, Current output: 0 to 500 W or less
0 to +10V
0 to 20mA
* Selectable by wiring of the terminal block.
12 bits
±1%
Synchronized with the scan of the main unit.
5-pole European-style terminal block (M2) x 1, Tightening torque: 0.2 N·m
AWG#28-16 * Be sure to use shielded twisted pair cables.
None
Not isolated
3 words
5V DC, 158mA
<Signal assignment>
1) Terminal block
VI0+ VO0+
II0+ IO0+
VI1+
II1+
GND GND
3-20