Profibus Dp Interfaces - Siemens SIMOTION D425-2 Manual

Interfaces

4.7 PROFIBUS DP interfaces

Representati Pin Assignment in 10/100 Mbit mode
on
8 - - -
I = Input; O = Output; B = Bidirectional
Autocrossing functionality (if required, transmit and receive lines switch over)
1)
Note
The MAC addresses are imprinted on an adhesive label that is located behind the protective
cover and can be seen from the front.
4.7 PROFIBUS DP interfaces
Characteristics of the interface
Table 4-16
Characteristics
Connector type
Cable type
Max. cable length
70
- - - Reserved, do
not use
Interfaces X126 and X136
Type
9‑pin Sub‑D socket
PROFIBUS cable
100 m at 12 Mbit/s
Assignment in 1 Gbit mode
DD- B Bidirectional
pair D-
SIMOTION D4x5-2
Manual, 04/2014