Digital I/Os - Siemens SIMOTION D425-2 Manual

Terminal
G
G
Table 7-5
Features
Connector type
Connectable cable types and conductor cross-
sections
Stripped length
Tool
Tightening torque
Max. current carrying capacity, incl. loop-through
Max. cable length
Features
Two "+" terminals and two "M" terminals are available. These are jumpered in the connector.
This loops through the power supply.
This power supply is only required for the digital outputs.
The option slot of the D4x5-2 control unit also provides the following power supplies:
● Electronic power supply of the TB30
● Supply of the analog inputs and outputs.
The power supply of the digital outputs and the electronic power supply of the Control Unit are
isolated.
7.3.3.4

Digital I/Os

Table 7-6
SIMOTION D4x5-2
Manual, 04/2014
Function
Ground
Ground
X424 wiring
Rigid
Flexible
Flexible, with wire-end ferrule without plastic
sleeve
Flexible, with wire-end ferrule with plastic
sleeve
AWG / kcmil
Terminal block X481
Technical specifications
Type
4-way screw-type terminal
0.2 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm²
0.2 mm² ... 1.5 mm²
22 ... 12
6 ... 7 mm
Screwdriver 0.5 x 3 mm (M2.5)
0.4 to 0.5 Nm
20 A (15 A per UL/CSA)
10 m
Terminal
1
2
Supplementary system components
7.3 TB30 terminal board
Designation
1)
DI 0
DI 1
105