Type Plate - Siemens SIMOTION D425-2 Manual

7.4.2

Type plate

Type plate
The figure below contains all the information included on the type plate.
Figure 7-8 CBE30-2 type plate
You might need to access the information provided on the type plate after mounting. Because
the type plate is located on the under side of the CBE30‑2, we recommend that you note the
serial number before installing it.
Note
The contents of the individual type plate fields of the CBE30‑2 may differ from those described
in this manual (e.g. updated product status, approvals and markings not yet issued, etc.).
MAC address
A second plate for the MAC address of the PROFINET interfaces is attached to the top side
of the board:
Figure 7-9
This plate is only visible when the CBE30-2 has been removed. You need the MAC address
to assign an IP address.
Note
The MAC address is affixed to the top side of the CBE30-2, behind the RJ45 sockets.
SIMOTION D4x5-2
Manual, 04/2014
MAC address
CBE30-2 MAC address
Supplementary system components
7.4 CBE30-2 Ethernet communication board
111