Simotion D4X5-2 Device-Specific Notes - Siemens SIMOTION D425-2 Manual

Standards and approvals
A.2 SIMOTION D4x5-2 device-specific notes
Declaration of conformity
The current Declaration of conformity is available on the Internet at Declaration of conformity
(http://support.automation.siemens.com/WW/view/en/10805446/134200).
C-Tick
AUSTRALIA
A.2

SIMOTION D4x5-2 device-specific notes

Note regarding SIMOTION D
Note
The product standard EN 61800-3 describes the EMC requirements placed on "Variable-
speed drive systems". As such, it defines different limits depending on the location of the
drive system.
SINAMICS S120 power units are designed for use in the second environment. The term
second environment refers to all locations outside residential areas. These are basically
industrial areas which are supplied from the medium-voltage line supply via their own
transformers.
The same installation instructions apply for the SIMOTION D4x5-2/CX32-2 Control Units as
for the SINAMICS S120 CU320-2 Control Units with regard to EMC.
It is essential to follow the installation instructions in the SINAMICS S120 Manuals in order
to ensure compliance with emitted interference and immunity values.
For more information on this topic also refer to Catalog PM21 as well as the SINAMICS
Function Manuals.
140
D425-2 DP, D425-2 DP/PN, D435-2 DP, D435-2 DP/PN, D445-2 DP/PN,
D455-2 DP/PN, CX32-2 and CBE30-2 meets the requirements of the
AS61800-3.
SIMOTION D4x5-2
Manual, 04/2014