Change The Direction Of Drive - Using The Clutch Pedal; Gear Shifting; Gear Shifting - Using The Clutch Pedal; Two-Stage Torque Multiplier - Zetor MAJOR HS Series Operator's Manual

Change the direction of drive - using the clutch pedal

1. Depress the clutch pedal and stop the tractor by foot brake.
2. Shift the reversing lever to the requested direction of tractor drive.
3. Release the clutch pedal only to the point of travel engagement and with simultaneous increase of engine
revolutions continue in smooth release of the clutch pedal.
4. Start smoothly and slowly.

Gear shifting

- Use control of the travel clutch with the button (1) on the
head of the gear shift lever for shifting of gear speeds
while the vehicle is in motion.
- During shifting, press and hold the button (1) of the
clutch control on the head of the gear shift lever, release
the clutch pedal, deactivate the gear shift, shift the
corresponding gear shift, release the button (1) and then
gradually increase the engine revolutions.

Gear shifting - Using the clutch pedal

Depress the clutch pedal (clutch disengaged). At the same time release the pedal of foot throttle and shift the
applicable gear speed. Release the clutch pedal smoothly (clutch is being engaged) and at the same time
increase the engine revolutions.

Two-stage torque multiplier

Shifting of individual gears of the two-stage multiplier is
controlled with one button (1) on the head of the gear shift
lever without the use of the clutch pedal. Individual shifted
gears are indicated by the symbol (2) on the display of the
instrument panel.
Hi - higher degree - the symbol with red backlight
Lo - lower degree - the symbol with yellow backlight
The torque multiplier cannot be shifted for reverse driving.
DRIVING OPERATION
53
MHS16N086
MHS16N062