Supplement; Technical Data - Vega VEGAPULS 62 Operating Instructions Manual

11 Supplement

11.1 Technical data

Note for approved instruments
The technical data in the respective safety instructions are valid for approved instruments (e.g. with
Ex approval). These data can differ from the data listed herein, for example regarding the process
conditions or the voltage supply.
General data
316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
Ʋ Process fitting
Ʋ Process seal
Ʋ Antenna
Ʋ Antenna impedance cone
Ʋ seal, antenna system
Materials, non-wetted parts
Ʋ Plastic housing
Ʋ Aluminium die-casting housing
Ʋ Stainless steel housing
Ʋ Cable gland
Ʋ Sealing, cable gland
Ʋ Blind plug, cable gland
Ʋ Seal between housing and housing lid Silicone SI 850 R, NBR silicone-free
Ʋ Inspection window in housing cover
(optional)
Ʋ Ground terminal
Ohmic contact
Process fittings
Ʋ Pipe thread, cylindrical (ISO 228 T1)
Ʋ Pipe thread, conical (ASME B1.20.1)
Ʋ Flanges
Weights
Ʋ Instrument (depending on housing,
process fitting and antenna)
Ʋ Antenna extension
Length antenna extension max.
VEGAPULS 62 • 4 ... 20 mA/HART - four-wire
316L, Alloy C22 (2.4602), Alloy 400 (2.4360)
On site (instruments with thread: Klingersil C-4400 is
attached)
316L,Alloy C22 (2.4602), Tantalum, 316L electropo-
lished, stainless steel investment casting (1.4848),
Alloy 400 (2.4360), 316L Safecoat coated
PTFE, PP, PEEK, ceramic (99.7 % Al
FKM (SHS FPM 70C3 GLT), FFKM (Kalrez 6375), FFKM
(Kalrez 6230 - FDA), graphite (99.9 %)
plastic PBT (Polyester)
Aluminium die-casting AlSi10Mg, powder-coated - basis:
Polyester
316L
PA, stainless steel, brass
NBR
PA
Polycarbonate
316L
Between ground terminal, process fitting and antenna
G1½ according to DIN 3852-A
1½ NPT, 2 NPT
DIN from DN 25, ASME from 1"
approx. 2 ... 17.2 kg (4.409 ... 37.92 lbs)
1.6 kg/m (1.157 lbs/ft)
5.85 m (19.19 ft)
11 Supplement
O )
2 3
69