Supplement; Technical Data - Vega FIBERTRAC 32 Quick Start Manual

6 Supplement

6 Supplement
6.1

Technical data

Note for approved instruments
The technical data in the respective safety instructions which are included in delivery are valid for
approved instruments (e.g. with Ex approval). These data can differ from the data listed herein, for
example regarding the process conditions or the voltage supply.
All approval documents can be downloaded from our homepage.
Electromechanical data - version IP66/IP67
Options of the cable entry
Ʋ Cable entry
Ʋ Cable gland
Ʋ Blind plug
Ʋ Closing cap
Material ca- Material seal
ble gland insert
PA NBR
Brass, nickel- NBR
plated
Stainless NBR
steel
Flammability class - Supply lines
Wire cross-section (spring-loaded terminals)
Ʋ Massive wire, stranded wire
Ʋ Stranded wire with end sleeve
Voltage supply
Operating voltage
Reverse voltage protection
Max. power consumption
24
M20 x 1.5; ½ NPT
M20 x 1.5; ½ NPT (cable diameter see below table)
M20 x 1.5; ½ NPT
½ NPT
4.5 ... 8.5 mm 5 ... 9 mm
–
●
–
at least VW-1
0.2 ... 2.5 mm² (AWG 24 ... 14)
0.2 ... 1.5 mm² (AWG 24 ... 16)
24 ... 65 V DC (-15 ... +10 %) or 24 ... 230 V AC
(-15 ... +10 %), 50/60 Hz
Available
6 VA (AC); 4 W (DC)
Cable diameter
6 ... 12 mm
● ●
● ●
● ●
FIBERTRAC 32 • Four-wire 4 ... 20 mA/HART
7 ... 12 mm 10 ... 14 mm
– ●
– –
– ●