Supplement; Technical Data - Vega VEGAFLEX 86 Operating Instructions Manual

11 Supplement

11.1 Technical data

General data
Material 316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
Ʋ Process fitting - rod version
Ʋ Process fitting - cable version
Ʋ Rod: ø 8 mm (0.315 in)
Ʋ Cable: ø 2 mm (0.079 in)
Ʋ Cable: ø 4 mm (0.157 in)
Ʋ Gravity weight (optionally available)
Ʋ Process seal on the instrument side
(cable/rod leadthrough)
Ʋ Process seal
Materials, non-wetted parts
Ʋ Plastic housing
Ʋ Aluminium die-cast housing
Ʋ Stainless steel housing (precision
casting)
Ʋ Stainless steel housing (electropol-
ished)
Ʋ Second Line of Defense
Ʋ Seal between housing and housing lid Silicone SI 850 R
Ʋ Inspection window in housing cover
(optional)
Ʋ Ground terminal
Ʋ Cable gland
Ʋ Sealing, cable gland
Ʋ Blind plug, cable gland
Second Line of Defense
Ʋ The Second Line of Defense (SLOD)
is a second level of the process
separation in the form of a gas-tight
feedthrough in the lower part of the
housing, preventing product from
penetrating into the housing.
Not suitable for hot steam applications > 150 °C (> 302 °F). In this case, use a device with a ceramic-graphite
1)
seal.
Aluminium, stainless steel precision casting and Ex d housing
2)
VEGAFLEX 86 • Modbus and Levelmaster protocol
316L and PEEK GF30, Alloy C22 (2.4602) and PEEK
GF30, 904L (1.4539)
316L and PEEK GF30
316L or Alloy C22 (2.4602)
316 (1.4401), Duplex steel (1.4462)
316 (1.4401)
316L
FFKM (Kalrez 6375)
On site (instruments with thread: Klingersil C-4400 is
enclosed)
Plastic PBT (Polyester)
Aluminium die-casting AlSi10Mg, powder-coated (Basis:
Polyester)
316L
Optional anti-corrosion coating with Novolak epoxy resin
according to Norsok 6C
316L
Borosilicate glass GPC 540
Plastic housing: Polycarbonate (UL746-C listed)
Metal housing: Glass
316L
PA, stainless steel, brass
NBR
PA
1)
2)
11 Supplement
73