Vega VEGAPULS 62 Operating Instructions Manual page 51

Menu
Setup
Display
Additional settings
VEGAPULS 62 • 4 ... 20 mA/HART - four-wire
value memory as well as event memory remain untouched. The
linearisation is set to linear.
False signal suppression: Deleting a previously created false signal
suppression. The false signal suppression created in the factory
remains active.
Peak values, measured value: Resetting of the measured min. and
max. distances to the actual measured value.
The following table shows the default values of the instrument. De-
pending on the instrument version, not all menu items are available or
some may be differently assigned:
Menu item
Measurement loop name
Medium
Application
Vessel form
Vessel height/Measur-
ing range
Min. adjustment
Max. adjustment
Damping
Current output mode
Current output Min./Max.
Lock adjustment
Language
Displayed value
Display unit
Scaling size
Scaling
Backlight
Distance unit
Temperature unit
Probe length
Linearisation curve
HART mode
6 Set up with the display and adjustment module
Default value
Sensor
Liquid/Water
Bulk solids/Crushed stones, gravel
Storage tank
Silo
Vessel bottom, dished form
Vessel top, dished form
Recommended measuring range, see "Technical data"
in the supplement
Recommended measuring range, see "Technical data"
in the supplement
0,000 m(d)
0.0 s
4 ... 20 mA, < 3.6 mA
Min. current 3.8 mA, max. current 20.5 mA
Released
Like order
Distance
m
Volume
l
0.00 lin %, 0 l
100.00 lin %, 100 l
Switched on
m
°C
Length of the standpipe Ex factory
Linear
Standard
Address 0
51