Vega VEGAPULS 62 Operating Instructions Manual page 70

11 Supplement
Torques
Max. torques, threaded version
Ʋ G1½
Max. torques, antenna system
Ʋ Mounting screws, antenna cone
Ʋ Compression nut, parabolic antenna
Ʋ Counter nut, parabolic antenna
Ʋ Terminal screws, swivelling holder
Max. torques for NPT cable glands and Conduit tubes
Ʋ Plastic housing
Ʋ Aluminium/Stainless steel housing
Input variable
Measured variable
Fig. 50: Data of the input variable
1 Reference plane
2 Measured variable, max. measuring range
3 Antenna length
4 Utilisable measuring range
Max. measuring range
70
200 Nm (147.5 lbf ft)
2.5 Nm (1.8 lbf ft)
50 Nm (36.89 lbf ft)
40 Nm (29.50 lbf ft)
15 Nm (11.06 lbf ft)
10 Nm (7.376 lbf ft)
50 Nm (36.88 lbf ft)
The measured quantity is the distance between the end
of the sensor antenna and the product surface. The ref-
erence plane for the measurement is the sealing surface
on the hexagon or the lower side of the flange.
3
4
35 m (114.83 ft)
VEGAPULS 62 • 4 ... 20 mA/HART - four-wire
1
2