Vega VEGAPULS 62 Operating Instructions Manual page 11

VEGADIS 82
PLICSMOBILE T61
Protective cap
Flanges
Electronics module
Supplementary electron-
ics for 4 ... 20 mA/HART
- four-wire
Antenna impedance cone
VEGAPULS 62 • 4 ... 20 mA/HART - four-wire
VEGADIS 82 is suitable for measured value indication and adjustment
of sensors with HART protocol. It is looped into the 4 ... 20 mA/HART
signal cable.
You can find further information in the operating instructions
"VEGADIS 82 4 ... 20 mA/HART" (Document-ID 45300).
PLICSMOBILE T61 is an external GSM/GPRS radio unit for transmis-
sion of measured values and for remote parameter adjustment of
plics sensors. Adjustment is carried out via PACTware/DTM and the
®
integrated USB connection.
You can find further information in the supplementary instructions
"PLICSMOBILE T61" (Document-ID 37700).
The protective cover protects the sensor housing against soiling and
intense heat from solar radiation.
You will find additional information in the supplementary instructions
manual "Protective cover" (Document-ID 34296).
Screwed flanges are available in different versions according to the
following standards: DIN 2501, EN 1092-1, BS 10, ASME B 16.5,
JIS B 2210-1984, GOST 12821-80.
You can find additional information in the supplementary instructions
manual "Flanges according to DIN-EN-ASME-JIS".
Electronics module "VEGAPULS series 60" is a replacement part for
radar sensors of VEGAPULS series 60. A different version is available
for each type of signal output.
You can find further information in the operating instructions "Elec-
tronics module VEGAPULS series 60" (Document-ID 36801).
The supplementary electronics is a replacement part for the following
sensors with 4 ... 20 mA/HART - two-wire:
•
VEGAPULS series 60
•
VEGAFLEX 80 series
•
VEGABAR series 80
You can find further information in the operating instructions "Supple-
mentary electronics for 4 ... 20 mA/HART - four-wire" (Document-ID
42766).
The antenna impedance cone is a replacement part used for optimum
transmission of microwaves and for sealing against the process.
You find further information in the operating instructions "Antenna
impedance cone VEGAPULS 62 and 68" (Document-ID 31381).
3 Product description
11