Vega VEGAPULS 62 Operating Instructions Manual page 17

Radar sensor for continuous level measurement of liquids

Hide thumbs Also See for VEGAPULS 62:

Table of Contents

4 Mounting

Fig. 9: Recommended socket mounting with parabolic antenna

When using a swivelling holder, keep in mind that the distance

between antenna and socket gets smaller as the inclination of the

sensor increases. Additional false reflections may be generated which

can influence the measuring result at close range. Max. torque see

chapter "Technical data"

Fig. 10: Distance between antenna and socket with horn antenna

Fig. 11: Distance between antenna and socket with parabolic antenna

If the medium has good reflective properties, VEGAPULS 62 with

horn antenna can also be mounted on a longer socket piece. Rec-

ommended values for socket heights are specified in the following

illustration. You must carry out a false signal suppression afterwards.

VEGAPULS 62 • 4 ... 20 mA/HART - four-wire

Table of Contents