Step 12 - Build The Virtual Array - enphase M215 Installation And Operation Manual

Microinverter

Hide thumbs Also See for M215:

Table of Contents

Step 12 – Build the Virtual Array

When the system is energized and the Envoy detects all the installed microinverters, you can create the

virtual array in Enlighten from the installation map you created. Once the virtual array is built, Enlighten

displays a graphic representation of the PV system. It also shows detailed current and historical performance

information. Please go to

based monitoring and analysis.

a . Scan the installation map and upload it to the Activation form online.

b . Use Array Builder to create the virtual array in Enlighten. Use the installation map created in step

9 as your reference.

NOTE: Go to

c . If you do not already have an account, go to

http://www.enphase.com

http://enphase.com/support/videos/

for more information on the Enphase Enlighten web-

to view the Array Builder demo.

http://www.enphase.com

M215 Installation and Operation

and click "Enlighten

141-00012 Rev 04

Table of Contents

Troubleshooting