Table of Contents
Advertisement
Build the Virtual Array
When the system is energized and the Envoy detects at least one microinverter, create the virtual array in
Enlighten from the installation map you created.
You can scan and upload the paper copy of the Installation Map, or you can use the ArrayGun feature
from the Enphase Installer Toolkit to easily build and configure a system. Refer to
http://enphase.com/products/arraygun/
To scan and upload the map and build the array:
1. Scan the installation map and upload it to the Activation form online.
2. Use Array Builder to create the virtual array in Enlighten. Use the installation map created in
Installation step 9 as your reference.
NOTE: Go to
3. If you do not already have an account, go to
Login" to register.
Once the virtual array is built, Enlighten displays a graphic representation of the PV system. It also shows
detailed current and historical performance information. Go to
information on the Enphase Enlighten web-based monitoring and analysis.
20
for more information.
http://enphase.com/support/videos/
2013 Enphase Energy Inc.
M250 Installation and Operation
to view the Array Builder demo.
http://www.enphase.com
http://www.enphase.com
and click "Enlighten
for more
141-00022 Rev 01
Advertisement
Table of Contents
