Step 11 – Build the Virtual Array
When the system is energised and the Envoy detects all the installed microinverters, you can create the virtual
array in Enlighten from the installation map you created. Once the virtual array is built, Enlighten displays a
graphic representation of the PV system. It also shows detailed current and historical performance information.
Please go to
http://www.enphase.com/uk
monitoring and analysis.
a. Scan the installation map and upload it to the Activation form online.
b. Use Array Builder to create the virtual array in Enlighten. Use the installation map created in step 10
as your reference.
NOTE: Go to
c. If you do not already have an account, go to
Login" to register.
18
for more information on the Enphase Enlighten web-based
http://enphase.com/support/videos/
Copyright © 2012 Enphase Energy
M215 Installation and Operation
to view the Array Builder demo.
http://www.enphase.com/uk
and click "Enlighten
141-00021 Rev 01