IDTECK STAR ICON100 User Manual page 33

STAR ICON100
13.3.1 Registering IDs
ID REGISTRATION
Invalid Card ID
Invalid T/S 1
Invalid T/S 2
Invalid RD
ID REGISTRATION
ID REGISTRATION
1: Card, 2: Key
Scanning ...
[_ _ _ _ _ _ _ _]
PW_ _ _ _ TS_ _ RD_
ICON100-20011128
'ENT'
ERROR DISPLAY
YES
YES
This is ID registration menu. To register additional IDs.
Press <ENT> key.
ID Number is registered in the controller by RF cards or through the
keypad. For RF cards, Press <1>key, the keypad, <2>key, or you can quit
the registration by pressing <ESC>key.
The reader is waiting for an RF card which is to be registered. The card
number will appear with a beep as the card is read.
This figure appears When you press the <2>key for through keypad
registration, then you are to enter eight-digit ID number. The ID number is
card number format.
Eight digit ID : Upper 3 digit : 0 ~ 255
REGISTRATION SELECT
CARD or KEY ?
KEY
ENTER NEW ID
(8 digit - Card data)
Card ID Error ?
NO
INPUT
PW, TS, RD
PW, TS, RD Error ?
NO
ID REGISTRATION END
Lower 5 digit : 0 ~ 65535
33
ID TECK
ACCESS CONTROLLER
CARD PRESENT CARD