IDTECK STAR ICON100 User Manual page 17

STAR ICON100
When registering cards,
1. The 'PW' is for password input. The password is needed to access doors when the controller is
operating in RF + PW mode. But regardless of the operating mode, it is necessary to input a
password when registering.
2. The 'TS' is for Time Schedule index(01~10). To control the accessible periods of time for each
card, set Time schedules first(see 13.2.1 page27) and enter the Time Schedule index number
here.
If there is no need to apply the Time Schedule(anytime accessible with that card), enter '00' for
the value.
3. The 'RD' is for selecting accessible reader for the card. Usually '3' (both readers) is used when
using both entry and exit readers. If '1' is entered for the value, only reader 1 will recognize the
card and reader 2 will deny access, indicating 'ACCESS DOOR ERR' on the LCD (this is also
the choice when using a one reader setup, meaning using one reader for entry and no reader
for exit). Likewise, when '2' is entered, only the reader 2 is accessible with that card and reader
1 access will be denied. And again, both readers are accessible when '3' is entered for the 'RD'
value.
ICON100-20011128
17
ID TECK
ACCESS CONTROLLER