IDTECK STAR ICON100 User Manual page 19

STAR ICON100
13.1 Setup Menu F1
SEARCHING KEY
Note There are four main setup menus. You need to press <F1> key for setup menu F1, <F2>
key for setup menu F2, <F3> key for setup menu F3 and <F4> key for setup menu F4. The
keys <4>, <6>, <2> and <8> are used to change submenus or to select values, <ENT> to
select and set, <ESC> to go to upper step or to leave setup mode. When selecting mode or
setting values is completed, in all kind of menu, the figure on the LCD returns to the first figure
of that menu. Then, for the next setting, use <4> and <6> keys(searching key).
ICON100-20011128
MODE SELECTION
SEARCHING KEY(key<4> or <6>)
TIME SETTING
SEARCHING KEY(key<4> or <6>)
APB SETUP
SEARCHING KEY(key<4> or <6>)
COMM ID
SEARCHING KEY(key<4> or <6>)
BAUD RATE
SEARCHING KEY(key<4> or <6>)
EVENT CLEAR
SEARCHING KEY(key<4> or <6>)
MASTER ID CHANGE
SEARCHING KEY(key<4> or <6>)
RF Only (DEFAULT)
RF+P/W( PassWord )
15 digit key in
NOT USE (DEFAULT)
ALL CLEAR
9600 (DEFAULT)
19
ID TECK
ACCESS CONTROLLER
USE
4800
19200
38400
YES
NO
KEY