IDTECK STAR ICON100 User Manual page 23

STAR ICON100
13.1.6 Clearing Event Data Buffer
EVENT CLEAR
Event Clear
1 - Yes , 0 - No
13.1.7 Changing Master Number
MASTER ID CHANGE
MASTER ID CHANGE
[_ _ _ _ _ _ _ _]
Master Card
Registered
13.1.8 Initializing the System
SYS INITIALIZE
Sys Initializing
1 - Yes , 0 - No
System
Initializing..
ICON100-20011128
Used to erase ALL of the event data such as the permitted access and
denied access records. If you want to do so, press <ENT> key.
When this figure appears on the LCD, press <1> key to clear and <0>
key to cancel the operation.
CAUTION: Be careful in using this operation, or you may lose
important data.
Press <ENT> key to change the current Master ID. You should use the
new Master ID to access the setup menu since the change is finished.
You should use eight digit number. Enter the eight-digit new Master
number.
And press <ENT> key.
The figure indicates that changing Master ID is finished successfully,
and soon, will return to the first figure of this menu. For the next setting,
use <4> and <6> keys.
This operation will initialize the STAR ICON100. Press <ENT> key, if an
initialization is needed (first time installation or resetting in the event of a
malfunction). CAUTION: Initializing will erase all stored data incl.
registered IDs event data.
When this figure appears on the LCD, press <1> key to clear and <0>
key to cancel the operation, then the LCD displays the first figure of this
menu.
This message appears while the system is being initialized. When
finished, you will be automatically returned to the setup menu.
23
ID TECK
ACCESS CONTROLLER