IDTECK STAR ICON100 User Manual page 21

STAR ICON100
MODE SELECTION
RF ONLY
MODE SELECTION
--> RF ONLY
MODE SELECTION
--> RF + PW
13.1.2 Time Setting
TIME SETTING
MM/DD hh:mm:ss
YYYYMMDDhhmmssW
_ _ _ _ _ _ _ _ _ _ _ _ _ _
13.1.3 Anti-Pass-Back Setup
ICON100-20011128
This menu is to select reader1 operating mode. You may choose to use
prox, PIN # verification, or both. The lower line on the LCD indicates the
current operating mode. Press the <ENT> key to change the mode.
Then, this figure appears on the LCD, press <4> key or <6> key to
toggle the mode, and finish selecting by pressing <ENT> key.
For the next setting, use <4> and <6> keys.
Note: RF only : The door is accessible with the card alone.
RF + PW : To access the door, the card and the password is
TIME SETTING
The lower line on the LCD indicates present time. To set time, press
<ENT> key.
Enter the correct information of the year, month, date, hour, minute,
second, day code in due order, then the setting is finished. If the input
information is out of range, an error message appears on the LCD and the
current time value is to be kept.
Day code
For example : '200106071330253' for Tuesday, June 7, 2001 01:30:25PM.
APB SETUP 'ENT'
needed.
15 digit + 'ENT'
ENTER : YYYYMMDDhhmmssW
'ENT'
'ESC'
1 : Sun., 2 : Mon., 3 : Tue., 4 : Wed., 5 : Thu., 6 : Fri., 7 : Sat.
NOT USE(DEFAULT)
SEARCHING KEY(key<4> or <6>)
USE
SEARCHING KEY(key<4> or <6>)
ALL CLEAR
21
ACCESS CONTROLLER
(15 digit) + 'ENT'
ID TECK