IDTECK STAR ICON100 User Manual page 25

STAR ICON100
13.1.13 Setting Duress Mode
DURESS MODE SET
NOT USE
DURESS MODE SET
--> USE
DURESS P/W
00
DURESS P/W
00
ICON100-20011128
DURESS MODE SET
'ESC'
DISPLAY CURRENT P/W
'ENT'
ENTER NEW P/W
( 2 digit + 'ENT')
You can select whether the Duress mode is used or not. The lower line
on the LCD indicates the current mode. To change mode, press <ENT>
key.
If you select USE, then system displays the current DURESS P/W. To
change P/W, press <ENT> key.
Note: You can set the duress output in setup menu F2 ( in/out define ). In
case of Duress, enter the 2 digit Duress Password and press <ENT>
and open the door using general process.
If you registered ID, then duress output(see 13.2.3) will be
generated
'ENT' NOT USE(DEFAULT)
SELECT KEY(4 or 6 keys)
IF DURESS MODE USED
.
25
ID TECK
ACCESS CONTROLLER
USE
DURESS P/W