Ethernet/Ip Settings; Parameters - Omron sysmac EtherNet/IP NJ Series Connection Manual

6. EtherNet/IP Settings

This section describes the parameters, global variables, tag sets and connection settings that
are all defined in this guide.

6.1. Parameters

The following parameters are required to connect the Driver and the Controller via
EtherNet/IP.
Built-in EtherNet/IP port (PORT2)
on Controller (Node 1)
Driver (Node 2)
Additional Information
For more information on the setting values of the Driver, refer to the following parts of the
αSTEP AZ Series/Motorized Actuator equipped with AZ Series EtherNet/IP Compatible
Driver USER MANUAL (HM-60372E).
- 4. Implicit communication
- 5. Setting of IP address in 2. AC power input type or 3. DC power input type
Name Setting item
IP address 192.168.250.1
Subnet mask 255.255.255.0
IP address 192.168.250.2
Subnet mask 255.255.255.0
Input data size 56 bytes (fixed)
Output data size 40 bytes (fixed)
6．EtherNet/IP Settings
Setting value
8