User's Manual
6
Performing Advanced Operations
This section shows how to perform advanced operations.
6.1
Answering Waiting Calls
You can accept a call on an extension on which there already is an active call.
Example:
a.
A call with A is in progress on LINE 1
= call in progress
b.
A call comes in from B
= call waiting
To answer B:
1.
Press the Accept softkey; the
answered; the previous call from A is put on hold:
2.
To toggle between the calls, press the navigation control's upper or lower rim.
Note:
To enable / disable the call waiting feature, see Section
6.2
Placing Calls On Hold
You can place a call on hold in order to answer a second incoming call (see Section
55) or to make another call.
To place a call on hold:
Accept an incoming call and then press the HOLD key; the call is put on hold:
To retrieve a call on hold:
Press the HOLD key again -OR- press the Resume softkey.
6.3
Calling a Contact Listed in the Directory
You can call a contact listed in your directory.
To call a contact listed in your directory:
1.
Press the CONTACTS key on the phone and then press the Select softkey to access the
directory.
2.
Navigate to the contact to call (see also Section
3.
Press the Dial softkey or the OK key on the phone.
Version 2.2.8
6. Performing Advanced Operations
icon is displayed indicating that the waiting call from B is
4.11.5
on page 39).
55
4.3
on page 29.
6.1
420HD IP Phone
on page