A Specific Third-Party Features; Broadsoft; Monitored Lines Based On Broadsoft's Broadworks Blf Service - AudioCodes 420HD User Manual

User's Manual
A Specific Third-Party Features
A.1

BroadSoft

This appendix describes phone features that are only applicable to specific third parties.
A.1.1

Monitored Lines Based on BroadSoft's BroadWorks BLF Service

This section shows how to configure Monitored Lines based on the BroadWorks BLF service,
typically used by executive assistants or front desk operators to monitor lines in the network.
Notes:
• The feature can also be configured by the network administrator from the Web interface.
See the Administrator's Manual for detailed information.
• Before configuring monitored lines, your network administrator must enable the BLF
service feature in BroadSoft's BroadWorks server. See the Administrator's Manual for
detailed information.

To configure a monitored line:
1. Long-press one of the four softkeys located on the device under the LCD; the Soft Keys
screen is displayed.
2. Navigate across to and select Speed Dial + BLF.
3.
Navigate down to enter the telephone number to assign the speed dial to.
4. Navigate down to enter a label to assign the speed dial to, and then press the Save softkey.
5.
View the line number displayed in the Soft Keys screen and in the LCD's idle screen.
The screen above shows:
(two softkeys on the left) two phones busy in conversation

(two softkeys on the right) two phones not busy

A semi-full icon (not shown) indicates that the phone is ringing.

Version 2.2.8 69
A. Specific Third-Party Features
420HD IP Phone