Using Two Lines; Choosing An Extension Line; Making A Call On An Extension Line - AudioCodes 420HD User Manual

User's Manual
6.11

Using Two Lines

Your phone supports up to two lines. Each is configured with its own extension number. The
figure below shows the idle screen of a phone set up with two lines whose extension numbers are
5000 and 7000.
Note: Only your network administrator can configure the two lines. See the Administrator's
Manual for details.

6.11.1 Choosing an Extension Line

You can select a line to use. The screen displays a bar above the extension number of the line
currently being used (see 5000 in the figure above). Until changed, all new calls are made on it.

To change lines:
1. Ensure that the LCD is in idle state and that no calls are established. View the two
configured lines displayed in the screen. View the bar above the currently used line.
2. Navigate to and select the other line; the bar moves above it; all new calls will now be made
on it.

6.11.2 Making a Call on an Extension Line

You can make a call on an extension line.

To make a call on an extension line:
1. When the screen is in idle state, raise the handset or press the key of the first digit of the
number to call; the NEW CALL screen is displayed:
2. Enter the number of the person to call or press the
Directory and press the Dial softkey; the dialed number is called and the line on which the
call is made is indicated in the screen.
When the called party answers, this screen appears:
Version 2.2.8
6. Performing Advanced Operations
softkey to select a contact from the
63 420HD IP Phone