5
Configuration
5.1
Safety messages
Instructions and procedures in this section may require special precautions to ensure the
safety of the personnel performing the operations. Information that potentially raises
safety issues is indicated by a warning symbol (
before performing an operation preceded by this symbol.
WARNING!
Explosions could result in death or serious injury.
•
•
•
•
Electrical shock could cause death or serious injury.
•
5.2
Overview
This chapter provides information about configuration and configuration tools.
provides extended information about the configuration parameters. The menu trees can
be found in
5.3
System readiness
5.3.1
Confirm correct device driver
The transmitter meets the NAMUR recommendation NE 53. Verify the latest Device
Descriptor (DD) or FDI Package is loaded on your systems to ensure proper
communication.
Rosemount 5408 and 5408:SIS Level Transmitters
Verify that the operating atmosphere of the transmitter is consistent with the
appropriate hazardous locations certifications.
Before connecting a Field Communicator in an explosive atmosphere, ensure the
instruments are installed in accordance with intrinsically safe or non-incendive field
wiring practices.
In Explosion-proof/Flameproof and Non-Incendive/Type n installations, do not remove
the transmitter covers when power is applied to the unit.
Both transmitter covers must be fully engaged to meet Explosion-proof/Flameproof
requirements.
Avoid contact with the leads and terminals. High voltage that may be present on leads
can cause electrical shock.
Section
C.1.
). Refer to the following safety messages
Configuration
Appendix C
69