Mechanical Installation
7.
8.
3.4.2
Shorten the extended cone antenna
This section only applies to the extended cone antenna (option code S1).
To determine the antenna length, follow the guidelines in section
Procedure
1.
2.
26
1
2
Measure the Antenna Extension Length (L).
Update the transmitter configuration to the new Antenna Extension Length (L).
•
Rosemount Radar Master Plus:
-
Under Configure, select Level Setup > Antenna.
•
AMS Device Manager and Field Communicator:
-
Select Configure > Manual Setup > Level Setup > Antenna.
Mark where to cut the antenna.
Cut the antenna at the marking.
3
4
Section
3.3.7.
Reference Manual