Mechanical Installation
3.5.3
Flanged version with air purge ring (option code PC1)
1.
2.
3.
4.
5.
6.
30
If applicable, assemble the segmented cone antenna (see
Place a suitable gasket on the tank flange.
Place the purge ring over the gasket.
Place a suitable gasket over the purge ring.
Note
A minimum gasket thickness of 0.125 in. (3.2 mm) is required for flanges with protective
plate design.
Lower transmitter with antenna and flange into the nozzle.
Antenna with air purge holes
Tighten bolts and nuts with sufficient torque for the flange and gasket choice.
Section
3.4.1).
Reference Manual