Figure 4-4:
A.
B.
Signal cable shield grounding
Make sure the instrument cable shield is:
•
•
•
Figure 4-5:
A.
B.
C.
D.
4.9
Connect wiring and power up
1.
2.
Rosemount 5408 and 5408:SIS Level Transmitters
Ground Screws
Internal ground screw
External ground screw
Trimmed close and insulated from touching the transmitter housing.
Continuously connected throughout the segment.
Connected to a good earth ground at the power supply end.
Cable Shield
Insulate shield
Minimize distance
Trim shield and insulate
Connect shield back to the power supply ground
Verify the power supply is disconnected.
Remove the cover.
Electrical Installation
63