About This Manual; Recipients; Symbols; Safety - Ingeteam INGECON SUN STORAGE 1Play Installation And Configuration Manual

Installation and configuration of a stand-alone system

1 About this manual

The purpose of this manual is to describe the strategy of a stand-alone system, and the system
connection and configuration for start-up.

1.1 Recipients

This document is intended for qualified personnel.
The status of qualified personnel referred to in this manual will be, as a minimum, that which
meets all the standards, regulations and laws regarding safety applicable to the tasks of installing
and operating this unit.
Ingeteam recommends this unit to be installed by a professional installer.

1.2 Symbols

This manual uses various symbols to emphasize and highlight certain texts. The general
meanings are explained below.
General warning.
Electrical danger.

1.3 Safety

In order to install or handle the INGECON SUN EMS STORAGE 1Play, follow
the safety guidelines indicated in the installation manual for the INGECON SUN
STORAGE 1Play.
All applicable safety-related legislation for electrical work must be complied
with.

1.4 Waste handling

These units use components that are harmful to the environment (electronic cards, batteries or
cells, etc.).
At the end of the accessory's life, the waste must be correctly processed by an
authorized hazardous waste management company.
Ingeteam, in accordance with its policy of respect for the environment, will
inform the authorized manager, via this section, of the location of components
to be decontaminated.
General information.
Read the section indicated.
Ingeteam