Receiver Locate Screen Definitions; Dynatel ™ Receiver 7500 Keypad Definitions - 3M Dynatel 7550 Series Operator's Manual

[14] Bar Graph: Graphical representation of the received signal.
[15] Signal Strength: Digital reading of the signal strength that the receiver is detecting
from the target.
[16] Soft Key Commands: Definitions for each of the four soft key functions.
[17] Gain Level: Displays relative gain level.
[18] Speaker Volume Icon: Indicates the relative volume level of the receiver. When the
third ring is dotted and 'xpnd' appears below the speaker volume icon, the receiver is in
"Expander" mode. This mode is used to pinpoint the target cable or pipe.
M. 3M Dynatel Receiver 7500 Keypad Definitions
™ ™
[1] Speaker Volume Control: Adjusts the volume of the receiver (off, low, med, high,
and xpnd).
[2] On/Off (Power): Turns unit on and off.
[3] TRACE (Locate) MODE: Toggles between Cable View locate mode and the four
other locate modes (cycles through available modes via the Mode soft key when in the
Cable/Pipe Locate screen.)
[4] GAIN: Adjusts the sensitivity of the receiver either up (+) or down (-) to maintain a
satisfactory signal level.
[5] DEPTH: Measures depth of target.
[6] Menu / OK: Sets the receiver to trace mode for locating cable or pipe and displays
Locate options, iD Marker templates and writing mode options, setup screens for
configuration of the unit, i.e.: clock, language, depth units, marker data and frequencies,
COM settings and Help files. Also acknowledges setup entries (OK).
[SK] Soft Keys: There are four soft keys (yellow keys) on the receiver. The function of
each key is shown above the yellow key on the display screen. The functions will change,
depending on the operation mode of the receiver. For instruction purposes in this manual,
the display command is followed by [SK] to identify it as a soft key.
[7] BULB: Toggles the display backlight on and off.
14 78-9000-5020-0 Rev C