Self Check Error Screen; Other Error Screens; Inadvertent Changing Of Language Setting - 3M Clean-Trace NGi Luminometer User Manual

With docking station

Hide thumbs Also See for Clean-Trace NGi Luminometer:

Table of Contents

13.04 Self Check Error Screen

This screen shows a 3M™ Clean-Trace™ NGi Luminometer that has failed its Background

or Calibration check. Do not use the instrument to make measurements as performance

may be compromised. Contact 3M or local 3M distributor for service or calibration.

13.05 Other Error Screens

There is no available memory within the instrument to store further results. Press OK, upload

all stored results to the PC and try again.

There is an internal fault with the chamber or connections to the chamber. Contact 3M or

local 3M distributor.

Error Message

Unexpected error:

requesting results

Unexpected error:

uploading results

Not all sample plans have

been downloaded

Error when deleting and

downloading sample plans

Not all sample plans have

been downloaded.

Retry Upload Sequence

There are no Sample Plans

Available

Error received:

deleting results, results

have not been deleted

No Network Connection

13.06 Inadvertent Changing of Language Setting

In the event of the language setting being inadvertently changed, it may be difficult to return to the original language. If this occurs, follow the

following sequence of key presses to return to the original language:

1. Switch the 3M™ Clean-Trace™ NGi Luminometer off, then switch on and wait for main menu to appear.

2. Press the "up" navigation button once.

3. Press Right function button once.

4. Press the "down" navigation button once.

5. Press Right function button once.

6. Select desired language from list using navigation buttons and press Right function button once.

User Action

Disconnect the 3M™ Clean-Trace™ NGi luminometer from the USB lead, or remove from the docking