Results Screen - 3M Dynatel 965AMS Instructions Manual

3M™ Dynatel™ Advanced Modular System 965AMS
POTS>Loss>Operation
4. Point to Point

5. Results screen:

Dynatel 965AMS-BT.indd 125
e. Press to begin
Dial
the test.
Measurements
1. Use a 965AMS tester
or a 965DSP tester set
to the tone mode.
2. Verify that both ends
of the circuit are on the
same frequency.
3. Press Send Tone at the
sending end.
4. Press at the
Measure
receiving end.
POTS Loss Measurement Normal Range
Measurement Functions
125
6/21/06 10:48:59 AM