Home Screen; Flexible Endoscope Workflow - 3M Clean-Trace Luminometer LX25 User Manual

Home Screen

• Shows recent audits
• Use the arrow in the gray bar to
toggle between a list of "Recent
audits" and "Recent failed audits"
The 3M™Clean-Trace™ Luminometer LX25 has a unique
workflow for each application . Please choose the appropriate
application and follow the screen prompts . All available
application workflow are outlined below .

1 . Flexible Endoscope Workflow

2 . Environmental Surfaces Workflow
3 . Surgical Instrument Workflow
1. Flexible Endoscope Workflow
• From the Home screen tap "Start"
to begin new test or select a
recent failed audit for retest
• Select device type
• Select Device . This is the serial
number or other unique identifier .
• Select "Reprocessing Step"
• Review selections
Select technician .
o
Can change device,
o
reprocessing step and test plan
Tap "Perform Audit"
o
• Select test point
• Review selections
• Insert ATP Test
• Press "Begin Measurement"
and wait until blue "Reading
Result" screen disappears then
press "Return"
• Repeat process until all test points
have been tested . Press "Done" .
10