Configuration Examples For Isg Layer 4 Redirect; Redirecting Unauthenticated Subscriber Traffic: Example - Cisco 10000 Series Configuration Manual

Router access network control protocol
Hide thumbs Also See for 10000 Series:
Table of Contents

Advertisement

Chapter 4
Redirecting Subscriber Traffic Using Intelligent Service Gateway Layer 4 Redirect
Session inbound features:
Feature: Layer 4 Redirect
Rule
#1
Configuration sources associated with this session:
Service: blind-rdt, Active Time = 40 minutes, 32 seconds
Interface: ATM2/0.53, Active Time = 40 minutes, 32 seconds
The following is sample output for the show subscriber session command for a session in which the
Layer 4 redirection is applied on the interface:
Router# show subscriber session uid 133
Subscriber session handle: D7000110, state: connected, service: Local Term
Unique Session ID: 133
Identifier:
SIP subscriber access type(s): IP-Interface
Root SIP Handle: 1E, PID: 73
Current SIP options: Req Fwding/Req Fwded
Session Up-time: 42 minutes, 54 seconds, Last Changed: 42 minutes, 54 seconds
AAA unique ID: 133
Switch handle: 17000084
Interface: FastEthernet0/0.505
Policy information:
Authentication status: unauthen
Session inbound features:
Feature: Layer 4 Redirect
Rule
#1
Configuration sources associated with this session:
Interface: FastEthernet0/0.505, Active Time = 42 minutes, 54 seconds

Configuration Examples for ISG Layer 4 Redirect

This section contains the following examples:

Redirecting Unauthenticated Subscriber Traffic: Example

In the following example, Layer 4 redirection is configured in the service policy map BLIND-RDT. This
policy is applied to all sessions at session start and redirects subscriber TCP traffic to the server group
called PORTAL. At account log-in, the subscriber is authenticated and the redirection is unapplied.
Service-policy type control DEFAULT-IP-POLICY
policy-map type control DEFAULT-IP-POLICY
OL-14660-03
condition always event session-start
action 1 service-policy type service name blind-rdt
Cfg
Definition
SVC
Redirect to group sesm-grp
Cfg
Definition
INT
Redirect to group sesm-grp
Redirecting Unauthenticated Subscriber Traffic: Example, page 4-9
Redirecting Unauthorized Subscriber Traffic: Example, page 4-10
Initial Redirection: Example, page 4-11
Periodic Redirection: Examples, page 4-11
Redirecting DNS Traffic: Example, page 4-11
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
Configuration Examples for ISG Layer 4 Redirect
!! applied redirect
4-9

Advertisement

Table of Contents
loading

Table of Contents