Contents - Cisco 10000 Series Configuration Manual

Access-Network Control Protocol
The Access-Network Control Protocol feature enhances communication between Digital Subscriber
Line Access Multiplexers (DSLAMs) and a broadband remote access server (BRAS), enabling the
exchange of events, actions, and information requests between the multiplexer end and the server end.
As a result, either end can implement appropriate actions.
History for the Access-Network Control Protocol Feature
Release
12.2(28)ZV2
12.2(28)ZV
12.2(31)ZV
12.2(34)SB
Finding Support Information for Platforms and Cisco IOS Software Images
Use Cisco Feature Navigator to find information about Cisco IOS software image and platform support.
Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account on
Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at
the login dialog box and follow the instructions.

Contents

•
•
•
•
•
•
OL-14660-03
Modification
Support was added for the ancp vdsl ethernet shaper command.
This feature was introduced and implemented on the Cisco 10000 series
router.
Support was added for the performance routing engine (PRE3).
This feature was integrated into Cisco IOS Release 12.2(34)SB for PRE3
and PRE4.
Added information on ANCP support for Asynchronous Transfer Mode
(ATM) DSLAMs.
Prerequisites for Access-Network Control Protocol, page 1-2
Access-Network Control Protocol Description, page 1-2
Configuring Access-Network Control Protocol, page 1-5
Configuration Examples for Access-Network Control Protocol, page 1-11
Additional References, page 1-14
Command Reference, page 1-16
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
1
C H A P T E R
1-1