Cisco 10000 Series Configuration Manual page 161

Chapter A ANCP Command Reference
Table 0-2
Field
OutBytes
InPRoc
OutPRoc
Broadcasts
InFast
OutFast
InAS
OutAS
OAM cells received
F5 InEndloop
F5 InSegloop
F5 InAIS
F5 InRDI
F4 InEndloop
F4 InSegloop
F4 InAIS
F4 InRDI
OAM cells sent
F5 OutEndloop
F5 OutSegloop
F5 OutRDI
OAM cell drops
PVC Discovery
OL-14660-03
show atm pvc Field Descriptions (continued)
Description
Total number of bytes sent on this VC. This number includes all fast-switched
and process-switched bytes.
Number of process-switched input packets.
Number of process-switched output packets.
Number of process-switched broadcast packets.
Number of fast-switched input packets.
Number of fast-switched output packets.
Number of autonomous-switched or silicon-switched input packets.
Number of autonomous-switched or silicon-switched output packets.
Total number of OAM cells received on this VC.
Number of end-to-end F5 OAM loopback cells received.
Number of segment F5 OAM loopback cells received.
Number of F5 OAM AIS cells received.
Number of F5 OAM RDI cells received.
Number of end-to-end F4 OAM loopback cells received.
Number of segment F4 OAM loopback cells received.
Number of F4 OAM AIS cells received.
Number of F4 OAM RDI cells received.
Total number of OAM cells sent on this VC.
Number of end-to-end F5 OAM loopback cells sent.
Number of segment F5 OAM loopback cells sent.
Number of F5 OAM RDI cells sent.
Number of OAM cells dropped (or flushed).
NOT_VERIFIED—This PVC is manually configured on the router and not
•
yet verified with the attached adjacent switch.
WELL_KNOWN—This PVC has a VCI value of 0 through 31.
•
DISCOVERED—This PVC is learned from the attached adjacent switch
•
via ILMI.
MIXED—Some of the traffic parameters for this PVC were learned from
•
the switch via ILMI.
MATCHED—This PVC is manually configured on the router, and the local
•
traffic-shaping parameters match the parameters learned from the switch.
MISMATCHED—This PVC is manually configured on the router, and the
•
local traffic-shaping parameters do not match the parameters learned from
the switch.
• LOCAL_ONLY—This PVC is configured locally on the router and not on
the remote switch.
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
show atm pvc
A-29