Cisco 10000 Series Configuration Manual page 174

clear ancp interface
clear ancp interface
To clear ANCP TCP neighbor connections, use the clear ancp interface command in privileged EXEC
mode.
Syntax Description interface
Command Default
When an interface is selected, all TCP connections under the interface and all of its subinterfaces are
terminated. When under a subinterface, only ANCP TCP connections under the subinterface are
terminated.
Command Modes
Privileged EXEC
Command History Release
12.2(34)SB
Examples The following example shows the output information that appears when you enter the clear ancp
interface command for a specific interface:
Router# clear ancp interface ethernet 0/0
Clear all ANCP neighbor TCP connections under interface Ethernet0/0 and its
subinterfaces?[confirm]
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
A-42
clear ancp interface interface
The type and number of an Ethernet interface or an sub-interface.
Modification
This command was introduced and implemented on the Cisco 10000 series
router.
Chapter A ANCP Command Reference
OL-14660-03