Feature History For Multiservice Activation Or Deactivation In A Coa Message; Qos Policy For Vsa 252 - Cisco 10000 Series Configuration Manual

Chapter 3 Dynamic Multiservice Activation and Deactivation
vsa cisco generic 252 binary 0c suffix " service3"
vsa cisco generic 252 binary 0b suffix " service4"
RADIUS Format
ISG#
00:41:15: RADIUS: CoA
00:41:15: CoA: 192.168.1.6 request queued
00:41:15: RADIUS:
00:41:15: RADIUS:
00:41:15: RADIUS:
00:41:15: RADIUS:
00:41:15: RADIUS:
00:41:15: RADIUS:
00:41:15: RADIUS:
00:41:15: RADIUS:
00:41:15: RADIUS:
00:41:15: RADIUS:
00:41:15: RADIUS:
00:41:15: RADIUS:
00:41:15: RADIUS:
00:41:15: RADIUS:
00:41:15: RADIUS:
The following sections provide more information about multiservice activation in Access-Accept
messages:
•
•
•
•

Feature History for Multiservice Activation or Deactivation in a CoA Message

Release
Release 12.2(31)ZV
Release 12.2(31)ZV1 and
12.2(31)ZV2
Release 12.2(34)SB

QoS Policy for VSA 252

You can use VSA 252 concatenated QoS syntax in a RADIUS CoA message.
The syntax is used to activate or deactivate ISG service and the QoS policy by parsing the VSA 252
concatenated string.
ISG manages multiple QoS services in one Access-Accept or CoA message and applies the message to
Note
activate static and parameterized QoS.
OL-14660-03
received from id 76 192.168.1.6:1700, CoA Request, len 67
authenticator C4 AC 5D 50 6A BE D7 00 - F9 1D FA 38 15 32 25 3A
Vendor, Cisco
ssg-account-info
Vendor, Cisco
ssg-command-code
0B 70 6F 6C 69 63 65 31
Vendor, Cisco
ssg-command-code
0B 70 6F 6C 69 63 65 32
Vendor, Cisco
ssg-command-code
0C 73 65 72 76 69 63 65 33
Vendor, Cisco
ssg-command-code
0B 70 6F 6C 69 63 65 34
Feature History for Multiservice Activation or Deactivation in a CoA Message, page 3-5
QoS Policy for VSA 252, page 3-5
Restrictions for Multiservice Activation or Deactivation in a CoA Message, page 3-6
Configuring Session Service Activation Using CoA, page 3-6
Modification
This feature was introduced on the Cisco 10000
series router for the PRE2.
This feature was introduced on the PRE3.
This feature was integrated into Cisco IOS
Release 12.2(34)SB and introduced on the PRE4.
Cisco 10000 Series Router Access Network Control Protocol Configuration Guide
Multiservice Activation or Deactivation in CoA Message
[26] 18
[250] 12 "S151.1.1.2"
[26] 17
[252] 11
[Service-Log-On service1]
[26] 17
[252] 11
[Service-Log-On service2]
[26] 17
[252] 11
[Service-Log-Off service3]
[26] 17
[252] 11
[Service-Log-On service4]
PRE
PRE2
PRE3
PRE4
3-5